Rule-Based Logic
Define conditions in plain terms — temperature above 2°C, vacuum below threshold, time of day — and PumpLogic acts on them automatically.
Intelligent Automation.
Rooted in Nature.
Rule-based sensor control that knows when to run your pump or attached relay device — built for the maple grove, ready for anything.
What Is PumpLogic?
Smart control that
Smart control that
reads the grove.
PumpLogic is a rule-based automation controller that monitors your sensors and decides exactly when to run your pump or attached relay device — no constant supervision needed.
Designed for maple sap producers who need reliable, season-aware automation, PumpLogic reacts to real-world conditions: temperature swings, pressure changes, time windows, and more. Define your rules once; PumpLogic handles every run.
Whether you're collecting sap from a hillside sugarbush or managing fluid flow in an entirely different context, the flexible rule engine adapts to your sensors and your schedule.
24/7
Monitoring
∞
Rules
10A
240V Relay
Core Capabilities
Built for the field.
Built for the field.
Designed for precision.
Built-In Sensor Suite
Ships with temperature, vacuum, and voltage sensors plus a 10A / 240V power relay — all read continuously so PumpLogic decides based on the full picture.
Flexible Scheduling
Layer time-based schedules with sensor triggers. Run the pump or attached relay device only during the maple season window, only when sap is flowing, only during daylight — all at once.
Real-Time Monitoring
Watch sensor readings, pump or attached relay device state, and rule evaluations live from any browser — from the sugarhouse or from home.
Season-Aware
Pre-tuned for the freeze–thaw cycles that drive maple sap flow. PumpLogic understands the rhythms of the sugarbush — so you don't miss a run.
Onboard RTC Clock
A battery-backed real-time clock keeps accurate time through power loss, so scheduled rules and time windows stay aligned with the grove — not the grid.
How It Works
From grove to grove,
From grove to grove,
four simple steps.
-
Unbox & Power Up
Sensors come pre-wired and ready — no assembly required. Power up the PumpLogic controller and wire your pump or attached relay device to the built-in 10A / 240V relay.
-
Define Your Rules
Open the web interface — no app install needed. Set the conditions that should trigger the pump or attached relay device: temperature range, time window, sensor thresholds, or any combination.
-
PumpLogic Monitors 24/7
The controller watches your sensors continuously, evaluating your rules in real time — even overnight, even through weather changes.
-
Your Pump Runs When It Should
When conditions are right — and only then — the pump or attached relay device engages automatically. Maximize yield during peak sap flow. Stop automatically when conditions fall outside your rules.
Use Cases
At home in the hardwoods.
At home in the hardwoods.
Ready for anything.
Primary Use
Maple Sap Collection
The sugarbush waits for no one. PumpLogic reads overnight temperatures, detects the freeze–thaw cycles that signal peak sap flow, and runs your vacuum or collection pump or attached relay device precisely when the trees are ready. When temperatures climb too high or drop below freezing again, it stops — automatically, without a single trip to the sugarhouse.
- Freeze–thaw cycle detection
- Temperature-gated pump runs
- Seasonal scheduling windows
- Overnight and unattended operation
Garden & Farm Irrigation
Run irrigation pumps or attached relay devices by air temperature and time-window rules — cool early hours on, midday heat off — within the 10A / 240V relay's rating.
Sump & Basement Pumps
Schedule preventative cycles for the pump or attached relay device, or run seasonal runoff routines on time-based rules. Relay-rated for many residential sump pumps or attached relay devices within 10A / 240V.
Cooling & Circulation
Run coolant or circulation pumps or attached relay devices when the included temperature sensor detects heat buildup. Protect equipment. Maintain consistent operating temperatures.
Custom Applications
Anywhere temperature, vacuum, voltage, or time should drive a pump or attached relay device within the 10A / 240V relay's rating, the rule engine adapts to your logic.
See PumpLogic
in action.
Explore the full interface in our interactive demo. Configure rules, watch sensors respond, and see the pump logic at work — no signup, no hardware required.
No account needed · Works in any browser